Jeep Wrangler Forum banner

91 YJ transmission issues

542 views 3 replies 4 participants last post by  steves92 
#1 ·
I recently put 33's on my jeep and ever since it has been acting up alot. There are three things it does. First it wont always hold first gear when pulling out. I'll start to pull out and it'll make a loud pop and go back into neutral. The second is it grinds going into third. And lastly it rolls back when parked on a hill in first without the e brake on.
 
#3 ·
If you added any BL to get the 33s on check your your shifter clearance and shifter boot clearance thru the tub...the shifter may be hitting the tub and not going all the way into gear..
 
#4 ·
Yes, like above mentioned. Take your shifter boot off and check to see if the body of tub is contacting your shifter arm. If it does, you might try leaving the inner boot off altogether and rechecking-that worked for me after doing my transfer case drop. Did you recently do a lift?

Sent from my QMV7B using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top