95 wrangler not getting fuel. new fuel pump and sensors and pcm. getting power to pump not sure on volts. when I run a hot wire to the fuel pump, pump runs but will not prime. if I spray starting fluid in carb it will start
any ideas????????
Will it stay running on its own after priming the Throttle Body with starting fluid, if so, it sounds like you have a faulty Throttle Position Sensor/Wide Open Throttle switch. The bad WOT switch will put the ECU into fuel CUT and not supply fuel to the injector(s).
95 with a carb? Doesn't seem right, is the PCM new or used? I had this happen and my injectors weren't getting a signal to start but once primed with fluid would work fine, I changed the PCM and that fixed it
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Jeep Wrangler Forum
9M posts
468K members
Since 2005
A forum community dedicated to Jeep Wrangler owners and enthusiasts. Come join the discussion about reviews, performance, trail riding, gear, suspension, tires, classifieds, troubleshooting, maintenance, for all JL, JT, JK, TJ, YJ, and CJ models!