Ax15 - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-08-2013, 07:21 PM   #1
Jeeper
 
twixter96's Avatar
 
Join Date: Aug 2011
Posts: 72
Ax15

4.2l I-6 currently with the Peugeot right now but pops out of reverse and looking to upgrade to an AX15 I will purchase off ebay out of Colorado (I'm in SASK). My question is what parts will I need to purchase for the conversion and if there is any other info I should know before I start ordering parts. I'm getting my local tranny shop (only one in small town) to do it and they charge $69/hour and he says it takes about 6-7 hours if it were a bolt on so I'm estimating around 8-9 hours

Thanks for your feedback

twixter96 is offline   Quote
Old 01-08-2013, 08:14 PM   #2
Jeeper
 
rykemc's Avatar
 
Join Date: May 2011
Location: Lubbock Texas
Posts: 1,223
Transfer case. Make sure you get the trans shifter and transfer case shifter. Skid plate will have a different bolt in location. Slave cylinder will be different also. Pilot bearing is also different
__________________
Check out my build at:
http://www.wranglerforum.com/f8/fina...ld-184838.html
rykemc is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 01:12 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC