I have a 92 4.0, manual of course, and need to bleed the clutch because it is starting to engage/disengage weird. The last time it was bled it felt a lot better and engaged/disengaged smoothly. now it kinda jerks. I have noticed some brake fluid on the firewall in the engine bay and figure I will be needing a new master cylinder sometime in the future. But, everything works fine so i will deal with that later.
Anyways, where is the bleeder screw on the AX-15? I read that I should pump the clutch pedal a few times and keep it depressed while someone opens the bleeder screw and lets the fluid flow until it is a steady stream, at which point the bleeder screw should be replaced. Is this correct? Thanks for any help.