body mount replacement - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on
Old 07-01-2008, 06:26 PM
Thread Starter
Join Date: Mar 2008
Posts: 11
Lime1ndacoconut is on a distinguished road
body mount replacement

ok so my jeeps 6 of the 8 body mounts r shot (you can see them cracked through the floor) and the front ones r starting to crack through, i found steel plates (front and rear) from Quadratech that can be welded over the old floors. will this suffice or should i save my money and buy a whole new body. its an 88 jeep Sahara. i want to start off roading asap
Lime1ndacoconut is offline   Quote
Old 07-02-2008, 11:15 AM   #2
scrambler1's Avatar
Join Date: Jan 2008
Location: vermont
Posts: 486
scrambler1 is on a distinguished road
body mounts

I just finished up rebuilding my 94 yj. One of the things I did was replace all the body mounts. I made mine. I used 1/8" steal plate drilled a hole big enough to fit the bolt through and the welded a nut to back side. Then carefully cut out enough of the body to fit the new body mount flush and welded her up. make sure you remove your fuel tank. It cost almost nothing I had most of the steal kicking around and the grade 8 7/16" and 1/2" nuts where cheap. after I was done I painted everything up and it looks good,and extremely strong. While I was at it I did a similar thing with 1/4" inch x 2" flat steal, welded to the frame for the crossmember. stengthen's the hell out of the frame and makes it alot easier to remove the crossmember. My wrangler was a southern jeep that only saw one vermont winter last year,It will never see another vermont as long as I own it. Salt is good on chips, but not on jeep's.

94' wrangler 4 cyl. 5 speed D30/8.8 ARB
82' scrambler 350 TBI/700r4 D30/Currie 9"
07' JK sahara
Whats the deal with the facebook crap?? ->->->->
Grown men should NOT be on Facebook.
scrambler1 is offline   Quote
Old 07-04-2008, 02:19 PM   #3
Join Date: Sep 2007
Location: Central Wisconsin
Posts: 116
former USMC is on a distinguished road
Depends on how many times you want to do this. The frame and body seperate real easily. I would do it right... once and never look back. Anything else is just a waste of time and money.
former USMC is offline   Quote
Old 07-04-2008, 03:26 PM   #4
Howie's Avatar
Join Date: Apr 2008
Location: Tampa
Posts: 43
Howie is on a distinguished road
I had a few of mine go as well. I think its from driving 45mph down bumpy dirt roads, and the body lift beat the mounts until they cracked. I had some steel laying around and drilled and rewelded everything. Havn't had a problem since, but I don't Baha it anymore.

Howie is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
daystar body mount bushing? 01blackws6 YJ Tech Forum 9 05-23-2011 09:59 PM
A Quick Body Mount Question dbbd1 TJ Tech Forum 2 10-20-2008 08:28 AM
removing body lift, possible motor mount lift poblem. upinar TJ Tech Forum 5 03-07-2008 09:07 PM
stock body mount bushings mrbigjeep Classifieds Archive 4 11-06-2007 10:15 AM
Body Mount Replacement - YJ whiteyj YJ Tech Forum 11 06-08-2007 11:17 PM

All times are GMT -5. The time now is 08:42 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner