Need a little help with my headlights on my 87 Wrangler. When I got it, the high beams wouldn't work when I pulled the blinker handle. Lights would go completely out, which told me the high beam side of the dimmer switch was bad, so I tried replacing the switch. When I installed it, I got one "click" out of it, then can't pull the blinker handle, it's like it's seized up after the first pull. I can loosen the mounting bolt and nut, the switch will return, then tighten everything back down, then I get the same result the next time I try it. Is this maybe an adjustment issue? I looked at the old switch, and installed the new one onto the column to the same location in the slotted mounting holes as the old one. Also, my horn doesn't work, delayed wipers don't work. It's either low or high on the wipers. Thinking issues inside the column?!