Jeep Wrangler Forum banner

first time clutch instalation ?s

3K views 46 replies 13 participants last post by  c5wagner 
#1 ·
well after searching my fingers off thought i would ask for some helpful hints on replaceing my clutch,,,i have all the bolts out except the top one behind my valve cover,,..can anyone lead me to a helpful pic by pic step for replacing my clutch...my yj is a 94 with 5 speed tranny,,

my flywheel was making some wracket then bam went the clutch , i plan on replacing with a clutch kit,,,what else should i do while im in there ?

any and all help will be greatfull...thanks
 
#41 ·
Thanks for the info. Trying to get one of those axles seems to be the hardest part from what I hear. But I will keep an eye out. My main concern at the moment is this damn Transmission bolt thats stripped. Until I get this project done, the Jeep is just sitting there looking sad.
 
#42 ·
:pullinghair:Ok so the pipewrench wont work. Theres no room to get it in there and grasp properly to be able to grip it. And yes the tranny and engine are lowered as much as possible to make room before anyone asks. Any other suggestions? Im getting the feeling the only option left is to cut it off and then drill out the rest which of course Ive never done either. I HATE THIS!!!!!
 
#43 ·
I've welded sockets to bolt heads before to remove stripped bolts. I don't suggest cutting or drilling since you'll need to make sure the bolt is fully out since the transmission is held on to the engine by 4 bolts really
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top