Jeep Wrangler Forum banner

Frame Rust Repair

1K views 4 replies 3 participants last post by  Wrangler_YJ_87 
#1 ·
#2 ·
Depends on how much rust you have. My frame was rusted out on both sides near the rear shackles. The bottom of my frame was gone under the shackles so plates wouldn't work. Remember you have to have good metal to weld to. Plus both my cross members that held the gas tank were rusted to. Since it hadn't had rear shock towers in years I added some of those as well. I went with Safety Cap replacement metal. You only need the top of the frame to be good shape with the caps. Good Luck!
 

Attachments

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top