Half pedal/New Slave - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 06-08-2014, 09:35 PM   #1
Jeeper
 
biggrenn's Avatar
 
Join Date: Feb 2012
Posts: 40
Question Half pedal/New Slave

I have had my 91 yj for about three years now and have had a bad slave cylinder for about three years, so I finally broke down and changed it today. Bleeding it was no longer possible being the slave was finally done and the clutch pedal was on the floor. Now after replacing it, all I have is a half of pedal. When bleeding it before I was able to get almost a whole pedal out of the clutch. I feel like I have bleed it enough that I should have a full pedal. I plan to replace the master cylinder at a later date in time. Any ideas or thoughts is greatly appreciated.

biggrenn is offline   Quote
Old 06-09-2014, 06:01 AM   #2
Jeeper
 
Jkilbert's Avatar
 
Join Date: Aug 2013
Location: McKeesport,Pa
Posts: 204
Send a message via Yahoo to Jkilbert
Sounds like you still have air in the system. Also hate to say it but your master may also be bad. A Ranger I have was doing the same thing. An internal leak was giving me only a half pedal and making it hard to get in gear.
__________________
1992 Wrangler 2.5l 5spd.
Yes it's a money pit, but it's my money pit.
Jkilbert is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 05:44 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC