Originally Posted by porkchop71
I have a 92 YJ. Im trying to free up the windshield bolts. I heated em up a bit. And they started to spin I was like Yay I m home free. Now they keep spinnin' Is there a back on those or something. I start to feel stupid and then I realize that there prolly has been a million people before me with this problem. Any thing I can do besides drill and retaps. Thanks in advance. p.s. I highly endorse that PB breaks lube/penetrant its the balls.
the best thing you can do is remove all the dash board bolts on ea. side pull the dash out about 1 1/2 in. one side at a time. Next use a box end wrench and reach up and hold the nut in place have someone remove the bolt from the outside.
how to replace nuts: place a short tappered pin -punch- drift pin
in the hole from the outside not too far about 1 1/2 in. slide the nut up the pin hold in place start bolt gently from the outside and hold with wrench
repeat 3 more times and your done. replace dash bolts on right side first,
on the left side there is a large vacumn breraker that may fall down a little bit, reach under the dash and push it back up about 1-2 in. and the dash will push back in place. replace dash bolts, done.
speakers can be replaced at this time but good luck on that one.