Jeep Wrangler Forum banner

kinda of a noob w a soa ?

879 views 3 replies 3 participants last post by  bottlefed281 
#1 ·
got a 91 yj and have been doin some reading and have been conteplating a spring over axle lift...would love the flex from this plus using stock parts cuts back on the $$ now i could spend $520 and have a rough country 4in lift shipped to the door...or i could do a spring over and ive seen a sye and cv shaft on ebay for $420 plus needing some traction bars..maybe make my own...as far as track bars for the front and rear...the rear i feel comfortable taking off do i need the front?? anyone done a spring over want to give me some insight or point me n a direction thanks
 
#2 ·
From talking with folks who have done one... cost is going to be closer to 1000+ to set it up and have it work the way it should. Steering is the biggest issue most folks run into.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top