You should have 3 bolts showing below your skid plate. 2 secure the transfer case. The third, toward the driver's side,is the torque arm. It stabilizes the tranny when it's under load. FSM recommends tranny mounting nuts to 30-50ftlbs. Torque arm nut to 20-35ftlbs. Hope this helps ya.
Stock '95 YJ 4 Banger 5spd Hard Top 105k
D30 front w/Aussie Locker, D35 rear w 4.10 gears
AX5 w NP231 T/C
TrXus M/T 33" on 15x8 Black Cragar 397
4" RC Suspension, 1" BL, 3/8" Boom Shackles, JKS Quick Discos, New Hub/Bearing Assemblys, Rotors, Radiator, XRC8 Winch
Fight Crime....Shoot Back