Knocking noise after a little rough road action - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 09-17-2008, 07:57 PM   #1
Jeeper
 
87YJWrangler's Avatar
 
Join Date: Sep 2008
Location: Owatonna, Minnesota
Posts: 640
Knocking noise after a little rough road action

Okay it was after doing about 10mph over a set of potholes that shook the hell out of me and my YJ it starting knockin it sounds like its either comin from the transfer case or piston 1 or 6 its still knockin I need help. If anyone has had this issue before advise would be helpful

87YJWrangler is offline   Quote Quick Reply
Old 09-17-2008, 08:11 PM   #2
Jeeper
 
Join Date: Sep 2008
Location: tiffin ohio
Posts: 33
could be almost anything. i went over a set of rr tracks and mine started to have a death rattle. ended up being timeing chain. the one in it was only about 3 months old. mine is 6 cyl '87

hope this helps

raymond hall is offline   Quote Quick Reply
Old 09-18-2008, 12:54 AM   #3
Jeeper
 
87YJWrangler's Avatar
 
Join Date: Sep 2008
Location: Owatonna, Minnesota
Posts: 640
Quote:
Originally Posted by raymond hall View Post
could be almost anything. i went over a set of rr tracks and mine started to have a death rattle. ended up being timeing chain. the one in it was only about 3 months old. mine is 6 cyl '87

hope this helps
I got the in line 6 87 also so I'll check that first thanks
87YJWrangler is offline   Quote Quick Reply
Old 11-19-2008, 06:40 PM   #4
Jeeper
 
87YJWrangler's Avatar
 
Join Date: Sep 2008
Location: Owatonna, Minnesota
Posts: 640
Fixed it

Fixed the issue I dented my oil pan under the first piston and it was knocking on the piston bearing
87YJWrangler is offline   Quote Quick Reply
Old 11-20-2008, 04:53 PM   #5
Jeeper
 
Join Date: Jun 2007
Location: sullivan county PA
Posts: 316
been there, you should consider some better bump stops
payj90 is offline   Quote Quick Reply
Old 11-22-2008, 03:53 AM   #6
Jeeper
 
87YJWrangler's Avatar
 
Join Date: Sep 2008
Location: Owatonna, Minnesota
Posts: 640
Had and looks as tho they have rusted away I figure when I get my lift kit ill put new ones on along with a new pan and skid plates all along the important parts i.e. Oil pan, pumpkins along with lockers, fuel tank, and transfer
87YJWrangler is offline   Quote Quick Reply
Old 11-22-2008, 04:11 PM   #7
Jeeper
 
Join Date: Jun 2007
Location: sullivan county PA
Posts: 316
mine had rusted pretty bad too so i just took them off and thought nothing of it, and it was fine for a year then i had the axle hit the oil pan, so i took the pan off beat it back out put it back on and was only going to being driving on road until i put some bumpstops on. then drove into a feild party and did it again. i guess the moral of my story is it will probley happen again.
payj90 is offline   Quote Quick Reply
Old 11-23-2008, 12:31 AM   #8
Jeeper
 
87YJWrangler's Avatar
 
Join Date: Sep 2008
Location: Owatonna, Minnesota
Posts: 640
Yeah I know I gotta get some on there again just I gotta make them and I dont have a welder or the rubber stops. Think I can buy em? and just bolt them on?

87YJWrangler is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
road noise Oldjeeper TJ General Discussion Forum 6 12-31-2008 08:26 AM
Runing rough, idle rough, cylinder #4 misfire spdrcrpete TJ General Discussion Forum 13 06-02-2008 01:32 PM
knocking noise vt95yj YJ Tech Forum 2 05-25-2008 04:21 PM
Knocking noise 9JΞΞРωяλиglєя7 TJ Tech Forum 3 08-19-2007 03:47 PM
what makes the knocking when the timing chain or gears make noise? huntingbuck101 TJ Tech Forum 11 02-25-2007 07:39 AM


logo carid shop wrangler parts carid fender flares custom wheels store avs deflectors at carid

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 11:20 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC