Originally Posted by Adam4fiddy
Today i jumped in the jeep and the clutch pedal went straight to the floor without much pressure at all. It was fine when i parked it yesterday, it still funtions fine and shifts fine but engages and disengages about an inch off the floor board.
I checked the M.C. and i could barely see any fluid in it at all. Is their anything else i should check for??
I will pick up some DOT 3 tomorrow and top it off, hopefully that will solve the issue.
Any suggestions would be appreciated. Thanks.
Your going to need to bleed the system if the fluid gets to low.
And second would be slave if after a lot I mean a lot of pumping it doesn't build pressure.
Clutch goes when pulling up a hill your rpms go up but you can feel it slipping.
Those are first signs so if that don't happen no worries for a clutch.