Originally Posted by FlyArmy
So I have been trying to go through my 92 2.5l and have been running into quite a few areas throughout that I am in need of assistance. Like my first post I will include pictures to see if any one can help me out. The first two pictures are of a jerry rigged "switch" under the dash. I followed the cable and it goes to the front axle. It is the single black cable. 1) What does this do because I have no idea. 2) I was in the back tracing more cables and came across a connector not plugged into anything with more wires coming off and into the rear. Any ideas?
3) Last one for now...When I open the throttle body should I see a oil or fuel collected in the "runners"going into the engine? Sorry if I am not using the right terms. My Chilton's still has not arrived.
Thanks in advance
Number 1 sounds like a ground.
Number 2 Not sure
Number 3 Sounds you looked into the "big metal thing" going to the engine? If you have fuel/oil mix in there that's completely normal.
Go army, Former 75th Ranger attached to 10th Mountain QRF!