Need emergency blinker switch? - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-21-2014, 09:36 AM   #1
Jeeper
 
Join Date: Feb 2013
Posts: 727
Need emergency blinker switch?

By one ordered an emergency blinker switch?

I have looked at rock auto, Morris 4x4, quadratech, 4wd, even Chrysler with no joy need the switch to fix my electric issue.

Thanks

89Saharagreen is offline   Quote Quick Reply
Old 03-21-2014, 10:14 AM   #2
Jeeper
 
Join Date: Feb 2013
Posts: 727
What I meant to say before I typed so terribly with my stupid phone is:

Has anyone ordered an emergency blinker switch or Hazard switch?

I have looked at rock auto, Morris 4x4, quadratech, 4wd, even Chrysler with no joy need the switch to fix my electric issue.

I have the part number but no one seems to have it.

P#52003425

89Saharagreen is offline   Quote Quick Reply
Old 03-21-2014, 10:18 AM   #3
Jeeper
 
90yjnc's Avatar
 
Join Date: Feb 2014
Posts: 586
Not something I've dealt with but I'd assume you could make just about any switch work. If you can't find a direct replacement, I'd pull it out and see what kind of connections it has and find a replacement on Amazon or something.
It should be fairly simple to rewire.
90yjnc is offline   Quote Quick Reply
Old 03-21-2014, 10:38 AM   #4
Jeeper
 
Join Date: Feb 2013
Posts: 727
I may have to go that route!

Was hoping someone recently ordered one or found a source for the part.

Thanks

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-21-2014, 12:21 PM   #5
Jeeper
 
0III0forlife's Avatar
 
Join Date: Mar 2012
Location: Ridgway, Pa.
Posts: 3,589
Images: 6
Here's one for you to try...Steering Columns Galore's Automotive Steering Column Home. I ordered my complete column through them. But they do have column parts. The steering column in a YJ is a GM Saginaw. I believe you have to call them to see if the parts are available.
__________________
'87 YJ, 4.2L built and bored, 8.5" of lift, 8.8 rear, AX15/NP 231, Tom Woods drive shafts, Flat fenders, 12,000LB winch, Custom bumpers, Rattle can paint job. Never completed...
0III0forlife is offline   Quote Quick Reply
Old 03-21-2014, 12:45 PM   #6
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
So are you needing the Actual Electrical Part or the Knob (Part number lists it as the knob)?

If the Knob I'd check the Cherokees at nearby wrecking yards.

I'm heading to our wrecking Yards tomorrow for my Monthly go around. If it's the knob you're needing I can see if they have one and just Envelope it to ya lol
__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Old 03-21-2014, 01:09 PM   #7
Jeeper
 
Join Date: Jan 2014
Location: Ft Worth
Posts: 45
I wonder if you could just clip those wires at the harness down under the column and put a push-button on the dash instead of ripping apart the upper column to replace the switch.
klx677 is offline   Quote Quick Reply
Old 03-21-2014, 03:10 PM   #8
Jeeper
 
Join Date: Feb 2013
Posts: 727
If you find a knob please do mail it I will gladly pay you for it.

The knob is part of the issue because it is broken but I have an electrical issue as well.

To clip the wires I have to take apart don't I?

I will try the website!

Thanks for all the responses!
89Saharagreen is offline   Quote Quick Reply
Old 03-21-2014, 03:17 PM   #9
Jeeper
 
Join Date: Feb 2013
Posts: 727
For life

Thanks for the website they refused to sell me just the hazard switch
89Saharagreen is offline   Quote Quick Reply
Old 03-21-2014, 05:19 PM   #10
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
Ok, I'll check for the knob tomorrow.

I thought the Hazard switch was part of the Turn Signal Switch under the Steering Wheel. My 93 is that way.
__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Old 03-21-2014, 05:45 PM   #11
Jeeper
 
mrjoey's Avatar
 
Join Date: Mar 2014
Posts: 158
just had my steering wheel center out last weekend,the turn signal guts have the emergency flashers built in to them
mrjoey is offline   Quote Quick Reply
Old 03-21-2014, 11:39 PM   #12
Jeeper
 
Join Date: Feb 2013
Posts: 727
Quote:
Originally Posted by mrjoey View Post
just had my steering wheel center out last weekend,the turn signal guts have the emergency flashers built in to them
Maybe all I need is the knob
89Saharagreen is offline   Quote Quick Reply
Old 03-22-2014, 12:22 AM   #13
Jeeper
 
Join Date: Feb 2013
Posts: 727
Ok so I am up late watching NCAA basketball and working on jeep I have a electrical gremlin when I turn on right blinker everything is good.

Turn on left the whole dash blinks a kind of slow blink?

What the heck and my hazards do not work I took steering wheel apart to look at hazard switch and was able to reset it.

It was partially depressed which made the blinkers come back but no hazards!

What on earth is causing this I did replace the passenger side bulb socket so I will check wiring but it is only two wires so unless they are rubbing I do not understand.

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-22-2014, 02:36 PM   #14
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
Did you replace the Turn Signal Switch in the Steering Wheel?

How about the Relay (I've seen some goofy things lol)?

Check the Ground on all 3 lights on the Passenger Side (Front/Fender/Rear)? Make sure all the connectors are clean. Any of the 3 can cause issues.
__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Old 03-22-2014, 03:32 PM   #15
Jeeper
 
Join Date: Feb 2013
Posts: 727
Yes I did replace turn signal switch did I do something wrong?

Or is it the wrong turn signal?

It was pretty straight forward.

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-22-2014, 03:54 PM   #16
Jeeper
 
0III0forlife's Avatar
 
Join Date: Mar 2012
Location: Ridgway, Pa.
Posts: 3,589
Images: 6
I know this sounds stupid, but did you try a new blinker?
__________________
'87 YJ, 4.2L built and bored, 8.5" of lift, 8.8 rear, AX15/NP 231, Tom Woods drive shafts, Flat fenders, 12,000LB winch, Custom bumpers, Rattle can paint job. Never completed...
0III0forlife is offline   Quote Quick Reply
Old 03-22-2014, 04:40 PM   #17
Jeeper
 
Join Date: Feb 2013
Posts: 727
Ok I should have posted all this to begin with so apologize for being a knucklehead.

Here is everything. I have done completely re-wired headlight harness for front lights and all new bulbs with dielectric grease on all connections created grounds for each turn signal front and sides and grounded to frame or other good ground. New left hand turn signal connector as well as bulb.

New turn signal switch in column new red LED bulbs in dash horn worked before I messed with any of this stuff and new horn relay.

I did not disconnect the battery ground or power when I messed with wiring so that is why I was thinking relay to begin with.

That should be everything

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-22-2014, 07:05 PM   #18
Jeeper
 
Join Date: Feb 2013
Posts: 727
So I went back to basics you might say and completely dismantled the harness apparently the front left turn signal was wired in correctly brown wire to ground by mistake ground wire to brown so now all blinkers work and no left turn signal always on when headlights are on.

However the hazards still do not work with headlights on or off no dice.

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-23-2014, 01:10 AM   #19
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
Ok according to my FSM, the Hazards are on separate fuse than the Turn Signals.

I'd check the fuse (#3) and if it's good check the power going to the fuse block. If that's good then check the wires at the bottom of the column and again at the top where the switch is.
__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Old 03-24-2014, 09:50 AM   #20
Jeeper
 
Join Date: Feb 2013
Posts: 727
Loc

I agree I pulled the hazard relay and will pick up a new one if that does not do it I will check power at connection points you mentioned.

I am assuming it should read 12volts?

Chief
89Saharagreen is offline   Quote Quick Reply
Old 03-24-2014, 11:52 AM   #21
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
Yup.

My Wrecking Yard Survey was delayed until today, I'll keep an eye out for the knob
__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Old 03-25-2014, 06:44 PM   #22
Jeeper
 
Join Date: Feb 2013
Posts: 727
Thanks Loc?
89Saharagreen is offline   Quote Quick Reply
Old 03-25-2014, 09:21 PM   #23
Jeeper
 
Join Date: Feb 2014
Location: Monroe, Or
Posts: 638
Got ya a knob. Just PM me your address and I'll throw it in an envelope. Don't worry about cost it's only a stamp lol.

Did you find the issues yet?

__________________
1993 YJ 4.0, 5 Speed, 3.55 (for now)
2000 Durango 4.7, 5 Speed Auto, 3.92
TrailBlazing Gear Post
Project Ole Grey
Locruid is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 12:21 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC