I have a 1990 wrangler 4.2 automatic...well today i reached to shift into 4x4 and the dang thing come loose.
I climbed under it and noticed that it has a clip up in the shifter that connects it. my question is how do I get this thing back together...I already put it back in 2 wheel drive.
I am in Carrollton Georgia if anyone is close.
It appears to be metal.I tried to slide it back together but I couldnt keep the little metal clips back...I figured there must be a trick to it...
as I am looking at the transfer case shifter it only appears to have three little pieces of metal in it ...And the shaft coming up from transfer case has a groove that gose all the way around.
that is not like mine...it comes apart more like where the last curve is ....like level with the black plug thing....it is hard to explain....my shifter rod is not that long it connects about half way down kida like if you cut that shifter in half and joined it ....where it joins the bottom half it slides together before it gets to the linkage at the bottom...kinda has a square hole.
i will figure out how to post a pic...if nothing else i will email you a picture.
1990 Jeep Laredo,YJ,stocker,2 inch body lift,4.2,auto,factory rims with 31x10.50x15 tires,black with gray hardtop.
1966 Mustang,289,auto black on black
"I have the right to remain silent" I just don't have the ability.