Jeep Wrangler Forum banner

no start no crank

923 views 5 replies 5 participants last post by  YJTN 
#1 ·
1987 jeep wrangle replaced battery sol starter ing mod neutral switch no click no nothing like its in drive but its in neutral pix of sol and wiring and pix of relay wiring would help please
 
#3 ·
having similar issues with my 95 yj. she started right up then shut down and no it wont crank, turn over or even click. lights still work but cant get anything else. battery was going bad, went ahead and replaced it. all terminals look good, im getting power everywhere i should be including the aftermarket omni magnum ignition coil (already installed when i bought her). im starting to think its something in the computer? does anyone have any ideas? anything and everything would be appreciated
 
#6 ·
Not related to your changes you have made but I recently experienced a similar situation and it wound up being the 6 AWG wire going from the battery to the fuse block. Check it out and make sure you don't have broken strands or a bad connection. Doubt this will help but worth checking!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top