Nutter Bypass, now no spark - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 12-06-2009, 06:41 PM   #1
Newb
 
Join Date: Dec 2009
Posts: 2
Nutter Bypass, now no spark

So I did the nutter bypass yesterday on my 89 wrangler with the carter carb. I had everything set up great and drove it home from my friends house about 10 miles away, but I went out today to start it up and now I cant get it to spark. I checked all of my connections and they are all intact. I just dont know what it could be because it drove home fine. Is there anything else that I could check?

Jkwap91 is offline   Quote Quick Reply
Old 12-07-2009, 06:11 AM   #2
kik
Jeeper
 
kik's Avatar
 
Join Date: Dec 2008
Posts: 4,466
Images: 1
Check to see if you're getting spark from the coil. If the coil is good might have a bad Ignition Control Module.

kik is offline   Quote Quick Reply
Old 12-07-2009, 06:51 AM   #3
Deaky

WF Supporting Member
 
Fweaky's Avatar
 
Join Date: Aug 2009
Location: Central Virginia
Posts: 2,202
Images: 18
Chances are you have a loose connection /splice. Make sure your wires are clear of the exhaust.
__________________
Nothing is foolproof to a sufficiently talented fool.
Fweaky is offline   Quote Quick Reply
Old 12-07-2009, 05:56 PM   #4
Newb
 
Join Date: Jan 2009
Location: Minden, NV
Posts: 10
Autozone has a tester in their stores for ignition modules. After I did the "Nutter Bypass" my module failed, intermittently. The tester found the fault. I'm affraid the price on those modules has gone up in the last two months, for some reason.

Good luck, Fred
Fred Holdorf is offline   Quote Quick Reply
Old 12-07-2009, 06:36 PM   #5
Newb
 
Join Date: Dec 2009
Posts: 2
thanks for the replies guys. ok well I take the no spark problem back, I am getting a spark and fuel to the carb but it still will not fire up it just cranks. Now what? I did adjust the timing at the time when it was running the other night but it was adjusted to idle just fine. Could messing with this be a problem?
Jkwap91 is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
nutter bypass I/M Pepper YJ Tech Forum 0 08-10-2009 10:38 PM
Need help with DW, spark plugs, and accessories for '06 wrangler 3bJeepina06 TJ Tech Forum 6 08-06-2009 02:21 PM
NUTTER BYPASS...whos done it ? Mike_fx4 YJ Tech Forum 8 07-17-2009 08:19 PM
Nutter Bypass Woes Ekalb1988 YJ Tech Forum 5 06-27-2007 09:29 PM
Nutter bypass HELP!!!!! bonechief YJ Tech Forum 1 02-04-2007 10:39 AM



» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 02:12 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC