PCV to Manifold - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-04-2012, 04:30 PM   #1
Jeeper
 
Yantzie's Avatar
 
Join Date: Nov 2011
Location: Nebraska
Posts: 79
PCV to Manifold

okay I am having a heck of a time finding a rubber fitting that goes from the pcv valve to the exhaust manifold there seems to be a hard vaccuum hose that is there but the rubber part is missing. Where do I find a replacement??

__________________
: Insert clever comment here :
Yantzie is offline   Quote Quick Reply
Old 03-04-2012, 04:48 PM   #2
Jeeper
 
Shanman's Avatar
 
Join Date: Dec 2011
Posts: 56
I just had a similar problem on my 94. Mine goes from the elbow to my intake. The rubber boot on mine was bad but the hard line was good. I went to autozone and bought a pack of vacuum block offs. I drilled a small hole in one that fit the elbow real tight. Pushed the hard line into it, good as gold.

Shanman is offline   Quote Quick Reply
Old 03-04-2012, 04:57 PM   #3
Jeeper
 
Yantzie's Avatar
 
Join Date: Nov 2011
Location: Nebraska
Posts: 79
yes that is exactly the issue the rubber boot is bad. If i fix it like that will it still pass smog testing?
__________________
: Insert clever comment here :
Yantzie is offline   Quote Quick Reply
Old 03-04-2012, 06:11 PM   #4
Jeeper
 
Shanman's Avatar
 
Join Date: Dec 2011
Posts: 56
It should because it still works. Just make sure you use one that fits and drill a really small hole in it. Drill the hole small enough so that you have to force the line into it. You can get an assortment pack of those block offs for like $5. Push the line through the hole so it protrudes a little
Shanman is offline   Quote Quick Reply
Old 03-04-2012, 09:52 PM   #5
Jeeper
 
Xpress's Avatar
 
Join Date: Jan 2011
Location: El Cajon
Posts: 2,566
You can always just get some new vacuum tubing and run it directly to the throttle body, bypass the hard line entirely.
__________________


2.5L Genius of some sort.
Xpress is offline   Quote Quick Reply
Old 03-05-2012, 11:08 AM   #6
Jeeper
 
Yantzie's Avatar
 
Join Date: Nov 2011
Location: Nebraska
Posts: 79
New vacuum tubing doesn't fix the issue. The rubber part changes the size of the tube, from the vacuum hose up to 1/2"-3/4" in size to fit on the pcv. The block off with a hole in it will probably be my only option as I can't seem to find the part anywhere.
__________________
: Insert clever comment here :
Yantzie is offline   Quote Quick Reply
Old 03-05-2012, 11:21 PM   #7
Newb
 
Join Date: Feb 2012
Posts: 8
The parts store here where I live has some plastic line adapters that can change from 1/2 to 3/4 male to male Would that be an option for you?

IAM747 is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
$600 to change rear seal? Smitty03 TJ General Discussion Forum 32 03-06-2012 11:59 PM
new to forum perfect10sn WF New Member Check In 10 03-05-2012 05:07 AM
New to the forum and 4-wheeling Coastie WF New Member Check In 13 03-05-2012 04:59 AM
My new to me 1998 Kevinw23 TJ General Discussion Forum 8 03-04-2012 04:02 PM



» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 09:14 PM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC