Jeep Wrangler Forum banner

Question about fuel lines

611 views 2 replies 2 participants last post by  WrangledMike 
#1 ·
So far I've dropped the tank and emptied the varnish, ordered a new fuel pump, rollover valves and fuel fill and vent hoses. Unfortunately, I haven't been able to get back under the jeep because of work and the kids.

I noticed when I was disconnecting everything that the rubber fuel hoses for feed and return between the pump and the metal lines are cracked and dry rotted. Since I can't find time to get out and look right now, can anybody tell me if these are molded hoses or just regular fuel injection rated hose I can pick up at pep boys?

Thanks in advance for your help!
 
#2 ·
The factory stock lines are molded hoses, but since they are no longer available, they can be replaced with fuel injection hose. Just leave them a little longer so they can make the turns easier.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top