Jeep Wrangler Forum banner

Radio

709 views 10 replies 4 participants last post by  Jeeprich25 
#1 ·
Have a Pioneer radio in my 89 that needs to go. Looking for what's gonna be the best radio for my money. Not looking to spend a lot but want one that has a usb and aux port.
 
#6 ·
E-mail or call Pioneer. Ask for a wire diagram. The diagram will identify a 12V. constant hot on the radio harness. Use your test light to identify a Jeep wire where the two harnesses come together that is hot with the key off. Connect these two wires and that should solve your problem. Good Luck, L.M.
 
#8 ·
What did you hook the yellow and red wires from the pioneer to? Yellow is your constant from the battery. Red is ignition. You have an issue there.
 
#11 ·
The wire you hooked them up to is only for ignition. Either you're missing a connection, or you need to run a new wire to the ignition harness or fuse block for a constant source.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top