SOA and 8.8 help - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today



Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 03-12-2014, 11:02 AM
Thread Starter
  #1
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
SOA and 8.8 help

My project has been on hold and I'm back at it. So, I figure I better get back on here and kept updating. So, I droped my d35 last night and have most everything I need to do my 8.8 swap and regear my d30. I have about 3-4 inches if spring lift right now. There's a wedge in the rear now(I bought the jeep lifted, the way it is). I was wondering if anyone can give me their opinion on going soa and ideas on what to do about drive shaft angles(front and rear). Also any ideas on shock mounts for the 8.8. I have new front and rear spring plates, ubolts, ect. Do I need to run different shocks to to go soa with my present lift? Also what about the transfer case? Any ideas on where to go with that? I am running out of money quick, and am trying to finish this up on reasonably low budget. Any help would be greatly appreciated!!!!!
Attached Thumbnails
Click image for larger version

Name:	image-2533284086.jpg
Views:	102
Size:	136.2 KB
ID:	863226  
OurYj is offline   Quote
Old 03-12-2014, 11:52 AM   #2
Jeeper
 
western196611's Avatar
 
Join Date: Jun 2013
Location: Central Kansas
Posts: 725
western196611 is on a distinguished road
With the spring over you will gain the width of your tubes and the thickness of your spring perches. It will total aprox 4", so if you have lift now.... WOW!! When I did my swap I just purchased shock mounts on e-bay for around $19.00. you will need a SYE and a new rear drive line unless you do a transfer case drop. (which I have) I was able to continue to use my stock drive line. On your shocks, you will be adding another 4" or so by going spring over. Do you have that much shock now?

__________________
1995, 4.0, 5 speed YJ, SOA, TC drop, 8.8 swap with 4.10 and LSD, e-grills bumper, 33" BF all terrains on 15" wheels.
western196611 is offline   Quote
Old 03-12-2014, 12:29 PM   #3
Jeeper
 
harleydragon's Avatar
 
Join Date: Jul 2012
Location: south georgia
Posts: 3,939
harleydragon is on a distinguished road
Quote:
Originally Posted by western196611 View Post
With the spring over you will gain the width of your tubes and the thickness of your spring perches. It will total aprox 4", so if you have lift now.... WOW!! When I did my swap I just purchased shock mounts on e-bay for around $19.00. you will need a SYE and a new rear drive line unless you do a transfer case drop. (which I have) I was able to continue to use my stock drive line. On your shocks, you will be adding another 4" or so by going spring over. Do you have that much shock now?
also gain the thickness of the spring pack...normally 5 1/2-6 inches total is gained
harleydragon is offline   Quote
 
Old 03-12-2014, 12:40 PM
Thread Starter
  #4
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
That's were I am not sure if I should bother going soa. I don't want the thing to be HUGE and I'm running out if money. But like I said I already have the plates. Anyone have a ballpark number for sye vs transfer case drop and best bet on a driveshafts? I am 50/50 to going either way and eager to get it done(without hacking and cutting to many corners).
OurYj is offline   Quote
Old 03-12-2014, 10:48 PM   #5
Jeeper
 
Join Date: Jan 2013
Location: Adair Co. KY
Posts: 442
kywaterman is on a distinguished road
Your most likely going to need an sye and cv shafts, if your already lifted 3 inches that will put you at 9 inches of lift, I doubt you'd get by with tcase drop. But anyways ballpark figures, 360ish for sye, 200 maybe for the cv shaft. Then you'll need spring plates perches u bolts for the front so like 130 for that. And shocks all the way around. Prolly going to need longer break lines too. And IMO, it wont look right without bigger tires. I'd stick with sua, then later down the road go soa
__________________
My 305 swap http://www.wranglerforum.com/f8/89-y...ad-256560.html
Debating a Chevy v8 swap? read this thread
http://www.wranglerforum.com/f330/ch...l#post10826122
kywaterman is offline   Quote
Old 03-13-2014, 12:13 AM   #6
Jeeper
 
yjJEEPyj's Avatar
 
Join Date: Sep 2011
Location: Davenport Iowa
Posts: 1,063
yjJEEPyj is on a distinguished road
U will deff need a SYE and Cv shaft. Ruged ridge SYE is like 200 i think. And Drive shaf u can get outa cherokee, or Buy a custom One for about 250, for a nice one. Tatton Drivelines is where i get mine. Here is a Pick of When i had SOA>

4" Springs 1" body Lift 8.8 rear 35x12.5 coopers



yjJEEPyj is offline   Quote
Old 03-13-2014, 07:54 AM
Thread Starter
  #7
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
That's a good looking rig. What did you do about a proportioning valve? Also I'm regearing my D30. I got a G2 install kit, and noticed no crush sleeve? Do I not need one? Just shim the old one? I picked up a 98 ZJ for $350. Girl was going to scrap it. Thing is mint other than a blown out t-case.
Attached Thumbnails
Click image for larger version

Name:	image-115563463.jpg
Views:	91
Size:	128.9 KB
ID:	865681  
OurYj is offline   Quote
Old 03-13-2014, 08:07 AM
Thread Starter
  #8
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
Final(90% sure) decision I'm going to keep it sua. Just waiting on my spring mounts and a new diff cover and c-clip eliminators. What are some ideas for doing the e-brake cables?
Attached Thumbnails
Click image for larger version

Name:	image-223187696.jpg
Views:	86
Size:	161.3 KB
ID:	865697  
OurYj is offline   Quote
Old 03-13-2014, 09:50 PM   #9
Jeeper
 
Join Date: Jan 2013
Location: Adair Co. KY
Posts: 442
kywaterman is on a distinguished road
Find a set off of a explorer cut them down and reuse.
8.8 E-BRAKE solution - JeepForum.com
__________________
My 305 swap http://www.wranglerforum.com/f8/89-y...ad-256560.html
Debating a Chevy v8 swap? read this thread
http://www.wranglerforum.com/f330/ch...l#post10826122
kywaterman is offline   Quote
Old 03-14-2014, 06:16 AM   #10
Jeeper
 
western196611's Avatar
 
Join Date: Jun 2013
Location: Central Kansas
Posts: 725
western196611 is on a distinguished road
Quote:
Originally Posted by harleydragon View Post
also gain the thickness of the spring pack...normally 5 1/2-6 inches total is gained
You are correct Harley, I forgot to mention the spring pack..
__________________
1995, 4.0, 5 speed YJ, SOA, TC drop, 8.8 swap with 4.10 and LSD, e-grills bumper, 33" BF all terrains on 15" wheels.
western196611 is offline   Quote
Old 03-14-2014, 10:04 AM
Thread Starter
  #11
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
Quote:
Originally Posted by kywaterman View Post
Find a set off of a explorer cut them down and reuse. 8.8 E-BRAKE solution - JeepForum.com
Perfect. This looks like a good idea.
OurYj is offline   Quote
Old 03-14-2014, 10:14 AM
Thread Starter
  #12
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
I have a front locker, I believe they call it a lunchbox locker? It's a mechanical locker that replaces the spiders. When I bought the jeep the kid said it was a Detroit but the only one I can find that looks like it is a spartan. Can anyone tell me if they can be rebuilt? When I drive in 4wd it just makes a loud popping. So I assume it's not engaging, it's just skipping. What's my best bet?
OurYj is offline   Quote
Old 03-20-2014, 06:07 PM   #13
Jeeper
 
dmaxthad's Avatar
 
Join Date: Mar 2014
Location: Yuma
Posts: 58
dmaxthad is on a distinguished road
Im in the process of the exact same thing. Im picking up my 8.8 on Saturday. I think I will be going with SUA and getting the lift kit from OME.
dmaxthad is offline   Quote
Old 03-21-2014, 06:24 AM   #14
Jeeper
 
Join Date: Jan 2013
Location: Adair Co. KY
Posts: 442
kywaterman is on a distinguished road
Just finished installing my 8.8 yesterday, besides hooking up breaks anyways. Used the 8.8 simple swap kit from ruff stuff, would highly recommend it to anyone else doing the swap. Every piece is super stout. Ford 8.8 Rear Axle Simple Swap (31 spline) - RuffStuff Specialties
__________________
My 305 swap http://www.wranglerforum.com/f8/89-y...ad-256560.html
Debating a Chevy v8 swap? read this thread
http://www.wranglerforum.com/f330/ch...l#post10826122
kywaterman is offline   Quote
Old 03-25-2014, 08:37 AM
Thread Starter
  #15
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
I the same kit but I ended up using the 8.8 perches(saving the other perches for if I decide to go soa) but I was alittle confused about the shock mounts. Idk if they sent me the wrong ones but they were cut for the axel tube, but wouldn't work unless I put them on the top of my axel. Anyways. I got different ones. I'm just about done with my swap. Just waiting on a new 4.10 ring and pinion for the 8.8. And for some reason my D30 wasn't set up right from previous owner. The pinion was skipping on the ring. Not sure what happend. It worked fine for a month. I thought it was the disconnect messing up. I got that working mint. That's when I found the pinion had tons of slop. It has a lunchbox locker in it seems to be working fine. I believe it's a Detroit EZ locker.
OurYj is offline   Quote
Old 03-25-2014, 08:38 AM
Thread Starter
  #16
Newb
 
OurYj's Avatar
 
Join Date: Oct 2013
Posts: 13
OurYj is on a distinguished road
Quote:
Originally Posted by dmaxthad View Post
Im in the process of the exact same thing. Im picking up my 8.8 on Saturday. I think I will be going with SUA and getting the lift kit from OME.
What's OME?
OurYj is offline   Quote
Old 03-25-2014, 08:46 AM   #17
Jeeper
 
laredo's Avatar
 
Join Date: Jun 2013
Location: Near Warren, Ohio
Posts: 691
laredo is on a distinguished road
Quote:
Originally Posted by OurYj View Post

What's OME?
Old man emu
laredo is offline   Quote
Old 03-25-2014, 10:09 PM   #18
Jeeper
 
Join Date: Jan 2013
Location: Adair Co. KY
Posts: 442
kywaterman is on a distinguished road
The shock mounts that come with the ruff stuff kit are a lot smaller than the stock ones, way tougher built just shorter in length. I believe it was to get them up and out of the way unlike the stock ones that hang down so low. I will most likely end up having to get shorter shocks, as the ones I already had will bottom out with the new mount locations

__________________
My 305 swap http://www.wranglerforum.com/f8/89-y...ad-256560.html
Debating a Chevy v8 swap? read this thread
http://www.wranglerforum.com/f330/ch...l#post10826122
kywaterman is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off






All times are GMT -5. The time now is 02:58 AM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner