started my 8.8 swap - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on
Old 03-24-2013, 08:20 PM
Thread Starter
TRM627's Avatar
Join Date: Sep 2012
Location: Prince George, VA
Posts: 192
TRM627 is on a distinguished road
started my 8.8 swap

okay so today i picked up my 8.8 for 125 from the yard!

i plan to completely redo axle, i bought calipers rotors and pads

i found this swap kit i plan on using what yall think? kNOw Where 2Jeep Complete Ford 8.8 Install Kit For '91-'95 Wrangler YJ

what seals and bearings should i replace?

also i have 4.88 gearing in front so i plan to do that in the rear and also i want a locker, dont want to spend to much but want good quality what should i do here? (does the brand of gear have to be the same as gears in the front?) and also should i lock the front d30?

and i have the 2.5 with ax5 so which adapter do i need and what is the best place to get the drive shaft?

i plan to do soa so i know the rear i just use the brackets in the kit and put on top but what do i need to do it in the front?

what else am i missing thanks
TRM627 is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

All times are GMT -5. The time now is 01:41 AM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner