Jeep Wrangler Forum banner

thinking about doing the LED dash lights

35K views 106 replies 38 participants last post by  DARKSLAYER56 
#1 ·
1) i have seen superbrightLEDs.com mentioned - can anyone confirm if the are simply unplug the old bulbs and plub in new ones and you are good... no other mods needed?

2) is there a thread anywhere for this?
 
#29 ·
I had a few questions about this upgrade in the beginning & all of my concerns disappeared once I began. The biggest was what will I find back there? The job was Jeep beginner level, perfect for me. All I found out of place was sand & dirt.
Here is the info from my receipt:

QTY: 3 WLED-xHP5: 194 LED Bulb- 5 SMD LED Wide Angle Wedge Base -WLED-BHP5:

QTY: 4 WLED-xHP5: 194 LED Bulb- 5 SMD LED Wide Angle Wedge Base- WLED-RHP5:

I listed it 2x because I used 2 colors. 4 bulbs for speedo & tach & 3 bulbs for the rest. Bulb #74 is for the heat which I didn't purchase.
Also the bulbs I bought are 360 degree. The total for what I got came to $44.64. For sure allot of bang for the buck!
 
#40 ·
green looks great i used weld single led 220 degree 10 dollars from super bright leds i bout 6 and only used 6 i didn't do the 4x4 light or the ac controls
 
#45 ·
Bdm09 said:
Just got my LED's in. It took 2 for Speedo. 2 for Tacho. And 6 for center gauge cluster. I got mine from Amazon (10 count 194 wedge type LED 220 degree). Price including shipping came to $10 an some change. A great inexpensive mod. Highly recommended.
These r the right ones right?
"Zone Tech 10x 194 168 2825 5-smd High Power Blue LED Car Lights Bulb"
$10.59
 
#57 ·
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top