I have the MC 2100 in my 90 YJ 4.2L. The throttle cable is now "bunched up", causing it to bend up (think upside-down "U"). That bend is causing it be very difficult to manage working it with my foot. If I don't have a strong return spring, the cable doesn't want to return back to its starting point easily and leaves the idle high. If I use a stronger return spring, it's like trying to lift a ten pound weight with my foot every time I press the pedal. And creeping in the woods is nearly impossible.
I want to cut down the cable, but in doing so, I will need to use some sort of cable stop on the end that is attached to the pedal hardware.
Anybody know where I can get some sort of cable stop that would do the trick?