Jeep Wrangler Forum banner

tranny

520 views 1 reply 2 participants last post by  bc3_Jeep 
#1 ·
Have 1995 & have replaced the master cyl. & slave cyl. still hard getting in to 1st gear sometimes & sometimes havwe to shut it off to get in gear but usually shifts great all the other times.:dance:
 
#2 ·
A.... make sure clutch is actually disengaging... could be air in system OR faulty NEW component (it happens)

B... if clutch IS disengaging, could be problem synchros or problem first gear

hope it is clutch not disengaging.....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top