trans replacement options - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 09-16-2010, 07:59 PM   #1
Newb
 
Join Date: Sep 2010
Posts: 2
trans replacement options

I am rebuilding a 89 YJ and my trans is crap. its the Aisin AX-15 (6 cyl), and its gone. I am looking for a compatable replacement with the slave cylinder out side of the bell housing. will the on on the TJ work? looking for some options.

RON89YJ is offline   Quote Quick Reply
Old 09-16-2010, 09:32 PM   #2
Jeeper
 
Djsthe1's Avatar
 
Join Date: Sep 2010
Location: Southern Maryland
Posts: 27
The AX15 out of a TJ has a bigger pilot bearing, you should be able to just swap the bell housing onto the old AX15 to get the external slave, thats what I did with my AX5. You could swap the input shafts to make it work but if you do that you might as well rebuild it..

Djsthe1 is offline   Quote Quick Reply
Old 09-16-2010, 09:36 PM   #3
IITYWTMWYBMAB

WF Supporting Member
::WF Administrator::
 
4Jeepn's Avatar
 
Join Date: Apr 2005
Location: Florence, KY
Posts: 10,093
Images: 5
94 and up YJ should have slave outside. Or if you go with a TJ get a 2000 or newer nv3550 5spd, better trans.
__________________
79.96.85.00.01.97.00.97.93.97.95.94
CJ.XJ.CJ. TJ. TJ.ZJ. TJ.TJ. ZJ.ZJ.YJ. XJ
4Jeepn is online now   Quote Quick Reply
Old 09-16-2010, 09:55 PM   #4
Newb
 
Join Date: Sep 2010
Posts: 2
thanks, probably going to do a rebiuld, then soa with 4" lift
RON89YJ is offline   Quote Quick Reply
Old 09-16-2010, 11:08 PM   #5
Jeeper
 
Join Date: Aug 2010
Posts: 15
I'm in the middle of swapping a ax15 out for a used ax15 that is newer. I believe that 93 and higher have a .750 input shaft. Not a big deal. Call Advanced Adapters and they will sell you a new pilot bushing. $25 with shipping. The problem I'm having is finding a 4X4 shift bracket to fit the newer tranny. Off to the bone yard to solve that problem.

You will need to find a 94 and above bellhousing is you want an outside slave cylinder.

I went with a used tranny because parts could possibly be $400 plus if it was a total rebuild. I'm a bit short on money right now but I will in the spring rebuild the old tranny as a spare.

Good luck.
pvcoach is offline   Quote Quick Reply
Old 09-17-2010, 07:47 AM   #6
Jeeper
 
Djsthe1's Avatar
 
Join Date: Sep 2010
Location: Southern Maryland
Posts: 27
Quote:
Originally Posted by RON89YJ View Post
thanks, probably going to do a rebiuld, then soa with 4" lift
SOA and a 4" lift? thats like a total of 10"s?

pvcoach, thats what I just did in my 91, swapped in a 95 trans with the external slave and when the funds are available I will rebuild the spare or just sell it..

Djsthe1 is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1990 Jeep AX-15 6cl M Trans story from Hell Peloquin YJ Tech Forum 11 06-14-2012 06:04 PM
auto trans. replacement pan cherokee kid TJ Tech Forum 4 09-13-2010 10:34 AM
replacement engine options Hunt YJ General Discussion Forum 12 04-29-2010 03:19 PM
headlight replacement options? dpage TJ General Discussion Forum 4 12-17-2009 12:18 AM
trans options???? Gaducker YJ Tech Forum 1 10-07-2009 07:01 PM



» Featured Product

All times are GMT -5. The time now is 11:04 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC