transfer case ?????!!!!?!?!? - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today

Thread Tools

Please support our sponsors and let them know you heard about them on
Old 06-23-2007, 01:21 PM
Thread Starter
elhuberto's Avatar
Join Date: May 2007
Posts: 64
elhuberto is on a distinguished road
Send a message via AIM to elhuberto
transfer case ?????!!!!?!?!?

i have an 87 wrangler
I was tring to drain my trans case but i undid the wrong bolt and i tryed moving the bolt thats on the very bottom of the trans case its a 3/4 bolt that has a spring in it

the problem is that the bolt snapped off and part of it is still in the case can any one show me a picture of it so i can see what i have to try and get out

and any other advice on how to get it out would also be of big help

and if any one can tell me how to drain my trans liek where the plug is for that that would help a ton
elhuberto is offline   Quote
Old 06-23-2007, 02:39 PM   #2
Iquois's Avatar
Join Date: Feb 2007
Location: Knoxville
Posts: 513
Iquois is on a distinguished road
You will have to get a EZ out....drill hole according to instructions, turn easy out counterclockwise to remove bolt...

88 Wrangler, inline 6, 5 spd, 8.8 rear end w/3.73 gearing, lifted, mud tires, sound bar w/cd player, Olympic Rock Slider, tube front bumper, herculined and the rest is pretty much stock
Iquois is offline   Quote
Old 06-24-2007, 12:18 AM   #3
fly's~yj's Avatar
Join Date: Mar 2007
Posts: 86
fly's~yj is on a distinguished road
it might at this point, be easier to remove the t-case and split it open, the bolt you tried to remove is the detent for the shifter..the on the back of the case..there are two bolts..either hex head or internal socket head, one is at the lower left on the back, the other, about half way up and more towards the center of the case on the back. the lower-drain, the other-fill, you only want to fill it, till the fluid starts to escape over the threads...the detant bolt-(on the bottom of the case) has a spring and a ball cap, it rides on the shifter bell crank and keeps it positive..even if you get the rest od that broken bolt out, you will need to remove the spring and cap, can't let that stuff rattle around..lots of threads on removal and case splitting..(remember to ONLY use the screw driver points) to split..good luck~fly..
fly's~yj is offline   Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
06 transfer case problems DINO64 TJ Tech Forum 7 01-06-2009 03:42 PM
transfer case vibration after sye install scrambler1 YJ Tech Forum 2 07-06-2008 11:03 AM
tow bar for 2007 Wrangler X douglassoilco JK General Discussion Forum 5 09-07-2007 11:35 PM
transfer case leaking trans fluid PLEASE HELP jtomasi1 YJ Tech Forum 8 08-03-2007 04:17 PM
Atlas Transfer Case Fapple TJ General Discussion Forum 17 02-12-2006 12:12 AM

All times are GMT -5. The time now is 02:15 PM.

User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC. is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner