Universal Joint and DriveShaft Repair - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 06-30-2008, 12:22 PM   #1
Jeeper
 
Join Date: Mar 2008
Location: New Braunfels, Tx
Posts: 57
Universal Joint and DriveShaft Repair

Alright, I was out doing some moderate rockin the other day around the house and I shredded the rear universal joint, split half of half the yoke going into the rear pinion gear.

I have already taken apart the driveshaft and put a new yoke and universal joint back together.

I read through the Haynes Manual and it basically says to put it back together like I took it apart.

Any pointers from the experts and am I missing anything?

__________________
Let's Roll Boys!
popatop is offline   Quote Quick Reply
Old 06-30-2008, 12:23 PM   #2
Jeeper
 
Join Date: Mar 2008
Location: New Braunfels, Tx
Posts: 57
Oh, and I have a Skyjacker rear driveshaft. One of the ears on the yoke going to the rear uni joint was bent, so I had to have a driveshaft shop cut this one off, and weld and balance another yoke on it.

__________________
Let's Roll Boys!
popatop is offline   Quote Quick Reply
Old 07-02-2008, 10:11 AM   #3
Jeeper
 
Join Date: Mar 2008
Location: New Braunfels, Tx
Posts: 57
Anyone?
__________________
Let's Roll Boys!
popatop is offline   Quote Quick Reply
Old 07-02-2008, 10:55 AM   #4
Hacks off Parts while Lit
 
whitebuffalo's Avatar
 
Join Date: May 2005
Location: The Sandhills of South Texas
Posts: 2,290
so you broke your pinion yoke or broke it on the driveshaft side?

if you're asking how to put the ujoint back on the driveshaft, get a large c clamp. put one round thing in on the outside of the d-shaft. put the ujoint in from the other side, being careful not to displace the needle bearings. put the other cap thing on the other side. then slowly crank down on the c clamp to press them into the driveshaft. i move the ujoint back and forth to keep from binding on the needle bearings (in and out). someone else can probably explain better, im a lousy teacher.
__________________
'90 YJ, ford 8.8, SOA, lincoln front, aussie rear, 4.88s, swampers.
whitebuffalo is offline   Quote Quick Reply
Old 07-02-2008, 05:38 PM   #5
Jeeper
 
Join Date: Mar 2008
Location: New Braunfels, Tx
Posts: 57
I broke the pinion yoke. I also broke one of the ears on the driveshaft that goes into the u joint which goes into the pinion yoke.

Needless to say, I will conquer that hill one day.
__________________
Let's Roll Boys!
popatop is offline   Quote Quick Reply
Old 07-02-2008, 05:46 PM   #6
Jeeper
 
Join Date: Mar 2008
Location: New Braunfels, Tx
Posts: 57
I broke the pinion yoke. I also broke one of the ears on the driveshaft that goes into the u joint which goes into the pinion yoke.

Needless to say, I will conquer that hill one day.

__________________
Let's Roll Boys!
popatop is offline   Quote Quick Reply
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Jeep Wrangler Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
U-joint problem on the Front Driveshaft Pinion side Beowulf TJ Tech Forum 6 08-21-2008 10:42 AM
Rear driveshaft pricing racer-xerols YJ General Discussion Forum 2 02-17-2007 12:15 AM
Gear Question! BJ'STJ TJ Tech Forum 33 12-12-2006 10:37 AM
t-case angle, XJ double joints driveshaft ?? 73mach1 YJ General Discussion Forum 1 09-12-2006 10:38 AM
Driveshaft "Knocking" scottc66 TJ Tech Forum 12 01-27-2006 01:10 PM



Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 08:58 AM.



Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC