URGENT!!!! headlight help needed
So the headlights in my buddy's 93 YJ quit. I pulled the switch and did resistance checks to find which was parking lights, which was headlights. The parking light portion of the switch works, the headlight portion doesn't.
So we installed two toggles. And that worked, sorta. Either the parking lights would work and headlights wouldn't, or vice versa, or both would work but only for about 2 seconds. Jiggling the white plastic connector would affect it somewhat.
Now, I have the Haynes manual here, but the colors don't match up perfectly and there's not a good trace pattern shown.
The wires on the connector are as follows:
A: Black/Yellow Stripe
B: Green/White Stripe
C: Red/Orange Stripe
D: Green/No Stripe
E: Red/Pink Stripe
Can anyone please tell me what wires go to which so I can get the toggles set up properly and cut the stock plastic connector out entirely? Thanks in advance
MY CAR:1964 Fairlane 500 4 door, straight six with a T5 speed
Tim's Jeep:'93 YJ, 2.5L, 5 speed, 35s, shackle lift, tow hooks, custom exhaust, relocated mirrors, 3 inch body lift, homemade snorkel, camo valve cover, half cab softtop, TJ rear bumper, etc
Zeb's Jeep:'89 YJ Islander, 4.2L, 5 speed, hardtop and half doors