So for the last few weeks I have been chasing problems around on my YJ. So all other issues resolved I have one that has been plaguing me. I replaced the slave cylinder and bench it (twice) most if not all the air should be out of it. When I press the clutch in and it is in first gear it will grind and grab. I pulled the engine and checked the clutch ( also make sure I didn't put in backwards). I reset the pilot bearing after I found it out of the fly wheel. Would not having the pilot bearing set right one the flywheel cause it to grab and grind or am I looking for a new clutch.
So I decided to name my jeep Christine, first after my wife second after the Steven King book, sooner or later one or both may kill me!!