Wiring Harness Compatibility - Jeep Wrangler Forum
Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > YJ Jeep Wrangler Forum > YJ Tech Forum

Join Wrangler Forum Today


Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 08-22-2014, 06:05 PM   #1
Newb
 
Join Date: Aug 2014
Posts: 1
Wiring Harness Compatibility

I have a 97 4.0 that I want to put into a 95 YJ. And I just got my hands on a 92 wiring harness. What kind of issues am I probably going to run into with this setup?

skGTIZ is offline   Quote
Old 08-22-2014, 06:16 PM   #2
Jeeper
 
0III0forlife's Avatar
 
Join Date: Mar 2012
Location: Ridgway, Pa.
Posts: 3,832
Images: 6
None if you still have the 95 motor to get all of the sensors off of. The 97 is OBD2 (on board diagnostics) and the 95 has OBD1 same as the 92 harness is set up for.

So you would need all OBD 1 sensors for the 97 motor.
__________________
'87 YJ, 4.2L built and bored, 8.5" of lift, 8.8 rear, AX15/NP 231, Tom Woods drive shafts, Flat fenders, 12,000LB winch, Custom bumpers, Rattle can paint job. Never completed...
0III0forlife is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Network Links
»Jeep Parts
» Featured Product

All times are GMT -5. The time now is 01:54 PM.



Jeepģ, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC