I have a 95 YJ 4cyl 5 spd with A/C.
In November of last year I had a small fire because one of the fuel lines hoses leaked fuel and I had a small fire. I replaced the fuel lines and the car has been running like a champ ever since. No issues at all.
I ordered a used wiring harness because some of the plastic of the wiring on my yj melted. I figured that I would get around to swapping it out.
about 2-3 weeks ago I only swapped out the wiring harness that connects to the ECU, Cam Shaft, O2, fuel rail, alternator, distributor, ignition coil, transmission, speed sensor, fuel pump, etc. Everything plugged in with out any issues.
When I went to go turn on the car, the car turns but no go. I checked all the fuses, inside the car, and in the engine bay and all are good. Changed Ignition coil and cam shaft positions sensor. I checked the fuel pressure and its good. Fuel pump is turning on. ECU is good.
All the lights on the car turn on gauges and everything are working but all it does is just crank.
I started testing and it seems like there is no power going into the ignition coill, fuel rail, distributor etc. Everything else is getting power.
Can someone help or make suggestions on what to check for? Thanks
In November of last year I had a small fire because one of the fuel lines hoses leaked fuel and I had a small fire. I replaced the fuel lines and the car has been running like a champ ever since. No issues at all.
I ordered a used wiring harness because some of the plastic of the wiring on my yj melted. I figured that I would get around to swapping it out.
about 2-3 weeks ago I only swapped out the wiring harness that connects to the ECU, Cam Shaft, O2, fuel rail, alternator, distributor, ignition coil, transmission, speed sensor, fuel pump, etc. Everything plugged in with out any issues.
When I went to go turn on the car, the car turns but no go. I checked all the fuses, inside the car, and in the engine bay and all are good. Changed Ignition coil and cam shaft positions sensor. I checked the fuel pressure and its good. Fuel pump is turning on. ECU is good.
All the lights on the car turn on gauges and everything are working but all it does is just crank.
I started testing and it seems like there is no power going into the ignition coill, fuel rail, distributor etc. Everything else is getting power.
Can someone help or make suggestions on what to check for? Thanks