I just started fooling around with jeeps and have a problem with removing the break rotor on a 1980 cj-5. We took the lock in/ lock out cap off and came to this gear, we removed the snap rring on the end of the shaft and thought we could just pull it off but cant. The spindle axle/splined shaft moves about 1/16 end play but the gear wont slide off. any ideas on how to get it off?
there's a weird shaped nut you have to loosen up, special socket fits it, but you can usually just tap on a screw driver or punch to loosen it.
"The danger to America is not Barack Obama but a citizenry capable of entrusting a man like him with the Presidency. It will be far easier to limit and undo the follies of an Obama presidency than to restore the necessary common sense and good judgment to a depraved electorate willing to have such a man for their president." http://mybroadband.co.za/photos/data...re_cowbell.gif