Jeep Wrangler Forum banner

2011+ automatic shifter knob

868 views 0 replies 1 participant last post by  epic_macp 
#1 ·
I figured I'd share this because i did a lot of looking beforehand and couldn't find much information. There were plenty of threads on manual shifter knobs but almost no information on automatics. So I took a chance and bought a $10 universal shifter knob off amazon just to see if it would work. The one I ordered worked for either a 12mm, 10mm, or 8mm shaft. Luckily the 8mm sleve fit perfect. So as long as it has the black round base identical to mine it will work on the automatics. And either the 10mm or 12mm sleve that comes with them will work on the 4x4 shifter. Just be sure its not too tall because as you can see in my last picture it does raise the height of it a little, it is a little more comfortable it this position IMO. Hopes this helps any of you guys out there with automatic transmissions.
 

Attachments

See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top