Originally Posted by JEEP-RI
I have a 2011 Wrangler Unlimited automatic that continues to stall after I start it. It will run for 3-5 secs then just stall out,no knocking or pinging just turn off.Does this once or twice a week.No check engine light comes on. Its also not low on fuel or parked on an angle. I do have date for service dept. but just looking for some help here.Thanks for your time.
2011 Wrangler Unlimited
275/70/18 Firestone Destination M/T
Sorry to hear about the new 2011 issue. Don't know how soon your service date is, but if you have more than a day, you might want to have one of the auto stores like Pep Boys or Autozone, etc , check your computer for any pending codes. Eventhough you do not have any dummy lights on your dash , you can still have codes logged in the OBD-II computer. In order for the dummy light and or lights to come on, the vehicles' computer must see the exact promblem twice in identical parameters, for instance,, if your issue happens more than once " as you mentioned " at different alttiudes or temperatures , etc there will be codes logged in but were all at different parameters, therefore no dummy lights. If you need any codes definitions , post your codes on this thread.
Hope it is something simple, Jeeps are awsome vehicles. They have their little qwerks , but it is worth it in the long run.
GOOD LUCK !!!!!