Originally Posted by movi3king
Hey guys, my 2011 wrangler low beams suddenly stopped working tonight for no reason. The lights work perfectly fine on high beams. I did check the bulbs and they are fine.
Occasionally when i unlock my car (and the low beams usually go on), or turn the nob as usual one will go on, then none will work then the other etc...
Something is wrong and im not really sure what.
I would like to check the fuse/relay but am unsure of which it is...
If anyone has any other solution to my problem please let me know.
We had a similar headlight problem start up out of the blue. Except, our blinkers and wipers went out at the very same time. That lead me to believe that it was a problem with the steering column stalks. Well, I drove it to our dealer the next morning, with no blinkers, and it turned out to be a bad circuit board on the back of the instrument cluster. The dealer had to replace the entire cluster panel, because it's apparently all one working piece. The whole nauseating ordeal took almost two weeks. They said that the panels were on back order, because of the high number of JK circuit board problems. Then the panels have to be individually programed with your current odometer reading. Chrysler must have just one person doing that job.
Luckily the dealer got the dash put back together like it never happened, with zero rattles. I hope that your headlight problem is a much simpler fix, and not like ours was. But if it is, start a case with Jeep immediately after your dealers diagnosis to expedite the process. They should also pay for a rental car, of course. Good luck!