Jeep Wrangler Forum banner

2013 10th Anniversary Rubicon Thread

2M views 17K replies 816 participants last post by  m998dna 
#1 ·
Hey guys,
Thought that I would start this thread in anticipation of the 2013 Anniversary Rubicon.
Im excited to see what Jeep has come up with to make this Rubicon "limited".
Hopefully its more than just some AEV bolt ons like the COD was.

Please feel free to post what you believe it might look like or any info you may have on it.

Hopefully Pat will post some info this month on this thread about the new Rubi.

If this Rubi is as great as I hope, Ill be trading my fully moded 2012 JKUR in on one.
 
#12,978 ·
Finally got Window Sticker. Window sticker also shows up on dealer website now. My wife thinks we should call the dealer to let them know that we know it's coming in. Just want to make sure the dealer doesn't try to get away with anything. Haven't had any problems with dealer yet but some of the posts on this forum have us wondering.
 
#12,979 ·
Alright here's some quick iPhone pics

Springs up front are both 17s according to the number. Did t get under to look at rears. But no rust. Rubi plate is correct. Nothing else I can figure out yet that is wrong. Can't multitask as well like I used with my Grand Cherokee. But probably shouldn't be anyway.

I do see some clear coat drip on the center latch point. But not the other two. Also my dealer advertised the shit out of themselves on my rear. That'll change shortly.
 

Attachments

#12,981 ·
Time flies when you're having fun!

Speedometer Gauge Measuring instrument Vehicle Auto part


For those not yet in the know and/or in possession of your 10A's, one of the EVIC displays keeps track of elapsed time you've spent together. In my case I've been nestled in that beautiful, comfortable red seat a bit over a full day already!
 
#12,984 ·
10a winch plate

I just got of the phone with jeep.:banghead: After 30 minutes on phone:popcorn::thumb: I got some information on the winch mount plate for the 10a. They are using the same winch mount as the call of duty and the moab. mopar part # 82213164. It sells for $379.00. I did a little research and found that AEV makes the aftermarket part . they sell it for $265.00.:punk:I just ordered from quadratec for $304.98 with shipping. I hope this helps people that have been waiting on this information. I told jeep that this should have been installed in the jeep, or that the information should have been available with out me pulling teeth.



AEV Winch Mount Upgrade Kit
For 12-13 Jeep® Wrangler & Wrangler Unlimited JK Call of Duty® MW3 & Moab Editions
Quadratec Part No: 12049.1306
Manufacturer Part No: 10305072AA
 
#12,991 ·
I just got of the phone with jeep.:banghead: After 30 minutes on phone:popcorn::thumb: I got some information on the winch mount plate for the 10a. They are using the same winch mount as the call of duty and the moab. mopar part # 82213164. It sells for $379.00. I did a little research and found that AEV makes the aftermarket part . they sell it for $265.00.:punk:I just ordered from quadratec for $304.98 with shipping. I hope this helps people that have been waiting on this information. I told jeep that this should have been installed in the jeep, or that the information should have been available with out me pulling teeth.



AEV Winch Mount Upgrade Kit
For 12-13 Jeep® Wrangler & Wrangler Unlimited JK Call of Duty® MW3 & Moab Editions
Quadratec Part No: 12049.1306
Manufacturer Part No: 10305072AA
You might want to cancel that order to avoid the return shipping FAST! I picked one up from the dealer to try, NOT EVEN CLOSE, I returned it yesterday.
 
#13,000 ·
I have one ordered . A member here Parker said he returned one . not the right part. I called chrysler/ jeep and my local dealers. I had jeep call my dealer and I was told that they used the same plate kit. It is a 2 piece kit . They gave me a mopar kit number which AEV makes the aftermarket kit for. I will let you people know if it works. I was going to cancel order , after Parker stated it will not fit. After I went to cancel it was in shipping.:nonono: I don't care if I have to do slight mods to make plate fit.
 
#12,994 ·
$2500 on exterior lights? For what? Replacement lights, add-on lights? :confused:

And about the Rubicon insert - I'd push the dealer to replace. Otherwise, it may become available in the Mopar catalog eventually...
 
#13,002 ·
Hey anybody that has knowledge in the Lifetime Maxcare Warranty. I understand you have until 12,000 miles to purchase it without an additional surcharge. But, i got a great deal and went ahead and got it. But, i think i may have shot myself in the foot! The Jeep is getting the right side front leak looked at this week, and also a couple of minor blemishes the service guy said they woud take care of. I was thinking no big deal, but the Lifetime doesn't pick up at the end of the 36/36,000, it starts at purchase date as i understand it, unlike the other warranty options. Sooooo, am i looking at a $100 deductible for a few things that were factory issues upon delivery because i no longer, in reality have the basic warranty? What say anybody!!! I could have waited to purchase the darn Lifetime, but it doesn't make sense to penalize someone for buying it early.........if it goes this way, i'll do what i can to cancel it.
 
This post has been deleted
#13,006 ·
well, the mods have begun. It started with one or two;



But she kept demanding.. "More", "More", so I gave in...even got her new shoes... this bee-atch is high maintenance I tell u



More pics to follow when I get her cleaned up..... been a long day with her already. Congrats to everyone who has and will own this ridiculously cool Machine.
 
#13,008 ·
well, the mods have begun. It started with one or two;



But she kept demanding.. "More", "More", so I gave in...even got her new shoes... this bee-atch is high maintenance I tell u



More pics to follow when I get her cleaned up..... been a long day with her already. Congrats to everyone who has and will own this ridiculously cool Machine.
Very nice. what are the specs?
 
#13,012 ·
Picked up the 10A last Saturday. All was well. Today, driver's side window won't go down. If I pull up on the switch you can hear the motor attempt to raise it but nothing when trying to lower it. Won't be able to get to the dealership until Saturday, maybe. Any ideas? A quick search was fruitless.
 
#13,014 ·
She"s finally here!!! Final price was 2.4 % under invoice and 1.49% financing. LOVE the Billet, I am glad that Anvil turned out to be an awsome color for everyone who ordered it but this was definatly the color for me :thumb:I have a Big Sh@& Eattin Grin on my face everytime I look at her, took 3 months and 2 days to get her but she was well worth the wait. I haven`t had any issues with her at all NO PUNCH LIST ITEMS PRESENT and I have no issues with the 6 speed other then I have realized how lazy I have become driving autos for the last 10 years :D.That being said I can definatly see how the autos could be better in some off road situations( rock crawling - taken on a few boulders already and still trying to get the pedal feel down) HOPE EVERYONE SEES THEIR JEEPS ARRIVING SOON :dance::dance::dance::dance::dance:
 

Attachments

#13,020 ·
Hi. New to the forums, but have been lurking for a few weeks. I ordered a 10A on 4/5/13....it's KZM as of 4/29/13. So now just waiting for it to make it's way out to Hawaii. Anyways I'm wondering if anyone has come across a grill guard/light bar that would fit the 10A front bumper.

Something like one of these:

MBRP 130716 Black Coated Front Light Bar/Grill Guard System : Amazon.com : Automotive

Aries 1050 Black Grille Guard : Amazon.com : Automotive

RealWheels, Classic Grill Guard With Light Mounts, Black 2007-2013 Jeep Wrangler JK & Wrangler Unlimited JK # 3001BPJ : Amazon.com : Automotive

I've confirmed that the 3rd item listed won't fit via Quadratec.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top