Alpine KTU-445U Power Pack Install / Harness - Jeep Wrangler Forum

Go Back   Jeep Wrangler Forum > JK Jeep Wrangler Forum > JK General Discussion Forum

Join Wrangler Forum Today



Reply
 
Thread Tools

Please support our sponsors and let them know you heard about them on WranglerForum.com
Old 01-10-2017, 05:36 AM   #1
Jeeper
 
Join Date: Aug 2016
Location: Orlando, Fl
Posts: 56
Jscrofani is on a distinguished road
Alpine KTU-445U Power Pack Install / Harness

I know this has been discussed before however I cannot locate the exact thread. I purchased an Alpine powerpack for my 2016 JKU, i'm comfortable doing the install myself but would like a little clarification. I've done the research and found the adapters I need to purchase.

71-6522
70-6522 x 2

It would be helpful if someone have the detailed connections to make the harness that will be the plug and play with the factory radio and the factory harness? The main questions I have are:

-Should I power this with the HD power or run directly to the battery?
-There was mention that I need to purchase the 2nd 70-6522 because I need two pins to make the harness?
-I will not use RCA connectors so do I need to use the blue remote power cable?
-Do these harness adapters wires match the factory colors?

Click image for larger version

Name:	IMG_3847.jpg
Views:	60
Size:	103.7 KB
ID:	3403730
Click image for larger version

Name:	IMG_3848.jpg
Views:	60
Size:	228.9 KB
ID:	3403738

Thanks in advance.
Jscrofani is online now   Quote
Old 01-10-2017, 07:28 AM   #2
J21
Jeeper
 
J21's Avatar
 
Join Date: Jul 2013
Location: St Simons Island
Posts: 77
J21 is on a distinguished road
Quote:
Originally Posted by Jscrofani View Post
I know this has been discussed before however I cannot locate the exact thread. I purchased an Alpine powerpack for my 2016 JKU, i'm comfortable doing the install myself but would like a little clarification. I've done the research and found the adapters I need to purchase.

71-6522
70-6522 x 2

It would be helpful if someone have the detailed connections to make the harness that will be the plug and play with the factory radio and the factory harness? The main questions I have are:

-Should I power this with the HD power or run directly to the battery?
-There was mention that I need to purchase the 2nd 70-6522 because I need two pins to make the harness?
-I will not use RCA connectors so do I need to use the blue remote power cable?
-Do these harness adapters wires match the factory colors?

Attachment 3403730
Attachment 3403738

Thanks in advance.
Instructions say you don't need a power lead from the battery but I ran one.
I needed the 2 extra wires on mine. (I may have 2 extra if you need)
You do not need the blue/white remote
I don't remember if the colors match but I think not

J21 is offline   Quote
Old 01-10-2017, 10:50 AM   #3
Jeeper
 
Mike-Mike's Avatar
 
Join Date: Nov 2015
Location: Louisville, KY
Posts: 674
Mike-Mike is on a distinguished road
where are putting the amp?
__________________
my pseudo-build thread - http://www.wranglerforum.com/f314/20...e-1754761.html
Mike-Mike is offline   Quote
 
Old 01-10-2017, 01:41 PM   #4
Supporting Member

WF Supporting Member
 
Just_John's Avatar
 
Join Date: Jan 2015
Location: Greenville
Posts: 179
Just_John is on a distinguished road
Mine is under the glove box.
Just_John is offline   Quote
Old 01-10-2017, 05:28 PM   #5
Jeeper
 
Join Date: Aug 2016
Location: Orlando, Fl
Posts: 56
Jscrofani is on a distinguished road
That would be awesome if you can send me the 2 extra wires. I'm going to order the harness tonight, and yes I am going to install behind the glove box.
Jscrofani is online now   Quote
Old 01-11-2017, 03:41 PM   #6
Jeeper
 
NLBeren's Avatar
 
Join Date: Apr 2015
Location: Boynton Beach, FL
Posts: 643
NLBeren is on a distinguished road
The colors should match up perfectly. They did for me. Per Alpine, you do not need to run a power wire to the battery. If you have questions, call them. Both Alpine and PAC were really helpful.

__________________
Neill | Boynton Beach, FL | '15 Hydro Blue Sahara | RK 2.5" Flex | Rancho 9000s | Barricade front bumper | Havoc rear bumper | 17" XD Series 795 | 35" MT Baja MTZ P3 | LEDs | Smittybilt 10K synthetic winch
NLBeren is offline   Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off




Download our Mobile App

» Featured Product

All times are GMT -5. The time now is 09:47 PM.


User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.

Jeep®, Wrangler, Liberty, Wagoneer, Cherokee, and Grand Cherokee are copyrighted and trademarked to Chrysler Motors LLC.
Wranglerforum.com is not in any way associated with the Chrysler Motors LLC
« Back

Enter your email address:

Delivered by FeedBurner