Jeep Wrangler Forum banner

Aluminum Bumper List

3K views 13 replies 12 participants last post by  TRBOKEV 
#1 ·
Hello,

I'd like to get F/R bumpers, but the caveat is I wish to get aluminum. I plan to keep the stock ride hight of the JKUR, so adding 150+ lbs. to the front end (w/ a winch) seems like it will lower the Jeep.

Anyone besides Rockford 4x4 make aluminum bumpers F and R?

Thanks, all!
 
#4 ·
I second the Nemesis product line with enthusiasm!
Really nice bumpers. A little avant-garde for some Jeepers, style-wise though.

Add the Rugged Ridge bumpers too. Front and back, very sharp. Neat concept in weight savings on their rear bumper.
 
#5 ·
I recently ordered a RH4x4 Alum full width front bumper and smitty winch. Figured the weight on my front to add an extra 80lbs give or take a few. 37lb bumper + 67lb winch(with synth line) minus the stock bumper weight. I put equivalent weights on my stock bumper to "visualize the weight effect" and it only lowered my Jeep 1/4" at the front fenders at most. I do have the TF leveling kit installed.
 
#11 ·
I made a huge mistake and bought a Teraflex 100 lb steel bumper. After adding a winch I got incredible sag in my Teraflex 2.5 front. Changed out the whole lift to metalcloak 3.5 and still have some slight sag. Steel bumpers are just not worth the headache of trying to balance the weight. I'm going aluminum armor for everything here forward
 
#13 ·
I think you mean Rock Hard 4x4 ;)

Rockhard has an extensive aluminum line. I've put their aluminum skids on, very happy with them so far.
Thank you!

I recently ordered a RH4x4 Alum full width front bumper and smitty winch. Figured the weight on my front to add an extra 80lbs give or take a few. 37lb bumper + 67lb winch(with synth line) minus the stock bumper weight. I put equivalent weights on my stock bumper to "visualize the weight effect" and it only lowered my Jeep 1/4" at the front fenders at most. I do have the TF leveling kit installed.
Thank you!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top