You have a 2-door, right? Let me know if you have fitment issues with that box. I've been told they don't fit the 2012 2 doors (well, not without cutting a bar under the seat).
The Bestop site shows that it won't fit the 2-door. Also, the Tuffy one doesn't fit, fyi. Basically, there isn't one that fits the 2-door :facepalm:. There are some locking gun boxes that will fit under the seat from the back that you can cable lock, but that's not gonna be as secure.
If u look under ur seat, there is a bar in the middle that runs from across the bottom of it. (if u r sitting in it from left to right)
No I don't have a pic, but u will see it. If u pull off ur seat and flip it over u should be able to use a zip cut. I'm not saying its a good idea to cut it...personally I wouldn't...but it's what u need to do to make it fit.
If u look under ur seat, there is a bar in the middle that runs from across the bottom of it. (if u r sitting in it from left to right)
No I don't have a pic, but u will see it. If u pull off ur seat and flip it over u should be able to use a zip cut. I'm not saying its a good idea to cut it...personally I wouldn't...but it's what u need to do to make it fit.
I like the trim on the air vents..Got me thinking I could paint the small areas orange as well just like you did..Did you paint them black and add the orange?
Ya, as you know the rings are white and the interior trim was black. So....painted the rings black and trim orange. Thought is be too much Orange if i did all the rings
Well I spent the money on this thing so I'll make it work, one way or another. Lol
Well I have a 2.5" Lift on, but when i need my next set of tires I'm trying figure out if i want to get 33s or spent a ton on 35s, new gears, and tire carrier. But Idk what will fit so i wanted to know what others were riding on...
33's will fit stock w/very little to no rubbing at full flex. 33's and your 2.5'' should get you full flex w/disconnected sway and no rubbing. 35's will fit with your lift but you may need to regear. You can get by with 3.73's but 3.21's would be unbearable I'm assuming as to me it's damn near unbearable w/stock 32's.
got one. a strange one. anyone notice their seat map pockets (in the back of the front seats) shedding foam inside? i keep a clean shop rag and small mag light in there. yesterday i spilled a bit of water on me on the way to work, went to grab the shop rag, and noticed small bits of foam everywhere. :nonono: if you look, one side (the inner outerside is covered in foam) thats what peeling away. STRANGE INDEED.
just got done with a closer look. appears like a clear shield? over the foam. thats whats peeling off. the foam is fine. looked at driver side. it does not have this top film cover over the foam. lol.... just going to peel the rest off a vac it out.
I looked at that one but was thinking for the extra $100 I would get the 2.5'' w/shocks. I've seen it with the stock Rubi wheels and it looks good IMO and would look even better with some 33's or even 35's if you have the gearing for it (I don't )
Hey so I don't have an arctic edition but it is absolutely my fave wrangler has ever made. I have a 2012 JKU Sahara but can anyone tell me about the arctic wheels and what kind they are?
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Jeep Wrangler Forum
9M posts
468K members
Since 2005
A forum community dedicated to Jeep Wrangler owners and enthusiasts. Come join the discussion about reviews, performance, trail riding, gear, suspension, tires, classifieds, troubleshooting, maintenance, for all JL, JT, JK, TJ, YJ, and CJ models!