Jeep Wrangler Forum banner

Barricade rock sliders fitment

2K views 11 replies 7 participants last post by  ConnorJKU 
#1 ·
HI just installed a set of barricade rock sliders on jku. I noticed that the passenger side sits with in about 1/2 in of hitting rubi rails but driver has more than an inch or so. My question is those with jku and same slider with oem rails do your all fit same? This is my 2nd set semt to me after the first set literally made contact with oem rails. Thanks for the feedback
 
#6 ·
I think mine fit about the same but my JKU is an 08 and I know the previous owner abused it, the right side rock rail is bent at the front so I assumed it was just my Jeep and not the Barricade Rock slider.

I'm with CoalCracker. I love mine, I've bounced them off rocks and stuff that would have done some damage to the tub and they've held strong.
 
#8 ·
Did you try removing the bolts and try installing them again. I thought I was done tightening mine and when I backed the bolts out because i forgot locktite, I realized that I was almost cross threading one of them.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top