So last week I installed the Bestop Twill Supertop NX. When I hit 20+ mph it is clearly evident that air is intruding into the cabin from the vacinity of the middle of the header. It sounds like a high pitched draft of air rather than the noise created by just driving the vehicle. Nowhere else is there noise, just around the middle of the header.
I have put foam sealing on various parts in an effort to stop the air but nothing has worked. I even put it across the entire contact area between the top and the jeep. Nothing even affects it.
This is my first jeep and I can't believe this is normal. Does anyone have any advice on locating the leak or ending the noise? It's actually a bit maddening.
The nx install typically requires you screwing the top on to the header bar. You should see some screw heads on the underside of the header. I would check there to make sure the fabric is not bunching and the screws are in all the way.
I spoke to the retailer, Morris 4x4, and they are putting in an order for a new top. I sent the rep pics and a video of how the top performs. Thus far the rep has been very helpful in starting this process. Appreciative of good CS.