Jeep Wrangler Forum banner

blacked out lights

9K views 14 replies 12 participants last post by  Scooter_Trash 
#1 ·
I've see a few fellow jeepers out there with blacked out headlights and other lights. Is this a self mod or something they bought? If so how much would it cost to add this mean look to my jeep?
 
#3 ·
In Massachusetts you may have trouble passing inspection though. They are getting pretty tight with anything that filters the original lenses from stock. You might check with your favorite inspection station to be sure you will not have to undo your work before the inspection.
 
#6 ·
go to gorecon.com they have side markers and blinkers but they are expensive. i tinted the back lights black and they look great once the weather gets better ill do the front lights too but not the headlights cause i do alot of driving
 
#8 ·
I bought a set of black transparent lens covers a few years ago for my black 2007 JK. I think they came from Quadratek. They were supposed to snap on over the headlights and allegedly could be removed quickly and easily for state inspection. My experience was that they did not snap in so easy and they completely screwed up my lights. The lights were shining way to high. I took them off, sent them back and had the dealership readjust my headlights. They really looked cool on the black Jeep but not at the expense of having unadjusted headlights.

Just my personal experience.
 
#9 ·
Ebay for tinted markers with amber bulbs, nightshades for the tails... Do the inside of the tail light lenses if you want them to hold up better and look better. And stop spraying before you think they're dark enough.... They look darker installed than they do laying on newspaper..... ;)
 
#13 ·
I did my front turn and the look great and work great with the amber bulbs. Looks just like a regular turn when light comes on. But the side markers I didn't change but came with the kit I got on E-bay. Thought about changing them but side markers are not very easy to change out.

 
#14 ·
Ive got all the lights tinted on mine, headlights, fogs, side markers, tail lights ect... Did them myself with a can of VHT night shades from pepboys.. Its a purple n black spray can... I did too many coats on my head n fog lights, it dimmed the lights a lot so i ended up putting HIDs behind them n now theyre great.. Actually planning on redoing them with less coats... The tint comes right off with rubbing alcohol... Good luck
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top