Jeep Wrangler Forum banner

Delrin Door hinge liners

30K views 174 replies 66 participants last post by  beermati 
#1 ·
Was just getting ready to order and read this:

"WILL NOT WORK WITH AFTERMARKET HINGES OR DOOR PINS!"

I have (and use) the door pin allignment thingys, is that what he means?
 
#4 ·
Sweet. I just remembered one our/my buddies here said he thought they'd work (Kadonny) I just called TMR (nice guy) He confirmed "No problems" so, Ordered they will be.

Thanks for the replies Guys.
 
#6 ·
What.....you don't trust me? :blackeye

They will work....trust me! (and the others)
I've been sitting here waiting for you to post that:) Like I knew the sun came up this morning....
Of course I trust you, I forgot and for the record you even forgot they'd fit.:)
Anyway, Now I gotta find where I'm ordering. The site I found I entered two(2) different credit cards and both were a No-Go (I'm like yeah right) I email the guy and he says they onlt do pay-pal ... Ok then why does your website let me fill out war and peace (twice) if its only paypal? Frustrating.
I sent a PM to Rick at Qtec asking if he has them.
 
#10 ·
Here ya go: https://justjeepgear.3dcartstores.com/TMR-Customs-JEEP-Delrin-Door-Hinge-Liners_p_942.html
No issues using my credit card. These are the best price on the net. I've had these on for two years now, and my doors slide on and off like butter! DO NOT buy the "install tool". Most everyone here, including myself, has used a deep 9mm socket with perfect results. Protect your paint and use a good heavy hammer to get the factory bushings out. I used a poly hammer to very gently tap the new Delrin liners into place. The whole job took about 10 minutes for 2 doors. Make sure to clean the inside of the hinges very well after removing the factory bushings. I used a .45ACP bore brush. After cleaning, I lightly coated the insides with WD40.
 
#11 ·
For DavesOffRoad, these would be the ones you want (no need for the tool)

TMR Customs Jeep Delrin Door Hinge Liners - Fits 4 Door Jeep JK

Use Coupon Code: TMR5 for a 5% discount.

JustJeepGear only takes paypal now.

I just like using Amex because its a write-off AND if there is ever a problem.... its like calling your Big Brother :)
 
#21 ·
Only if you spend a lot. He has the lowest price and free shipping.

I don't have plans (yet) for taking my doors off but am thinking that perhaps I should buy these anyway "just in case" I do in the future. I hear the stock liners get really hard to remove later...
I Highly recommend running "naked" so yes its a good idea sooner than later.
 
#19 ·
I don't have plans (yet) for taking my doors off but am thinking that perhaps I should buy these anyway "just in case" I do in the future. I hear the stock liners get really hard to remove later...
 
#25 ·
Here are the ones I took out of my 2010. They were in there for 4+years and endured the Pennsylvania salt during winter. Notice how I had to pound in the top lips to get them to free up enough to hammer them down through the hinges. They would not move trying to pound them upwards.

 
#23 ·
Love this forum...the warning of not working with aftermarket guides was delaying my order. You guys rock, just ordered mine.

They were never really hard to get the doors up and out but man those hinge liners look nasty and I know it's only a matter of time. Might as well replace this summer and have peace of mind for next spring.

Thanks ya'll
 
#30 ·
Only takes One winter....

Dang it, here is something else I didn't know I needed, but now I must have :). I've got my trail doors on and I'll be switching back and forth with the seasons so... the credit card is out.
Could be worse.... We could be at a Strip Club:eek: Not sure what that has to do with anything but "I've heard" they can get Expensive (especially when the Lawyers get the video tape(s))
 
#32 ·
Well I can't argue with that logic SS. And they are ordered and on the way... I wonder what else I didn't know I needed...
said the Moth to the flame........:)

My must haves:
- GraBars
- M.O.R.E. dead pedal
- MetalCrafters Grill insert
- JWSpeakers Heads/Fogs
- Door Pin Extender/guides
- Mopar Headliners
- Qtec Hitch
- Mopar Door Sill(s)
These were ALL transferred from my Sahara to my Rubicon HR

Makes My Jeep "My Jeep" :)
 
#33 ·
Let's see...
I have the Grab Handles
Can't do the dead pedal since I have a clutch
Looking for some grill inserts now
Definitely need LED headlights
Guess I'll have to research the Pin Extenders...
I've got the Hot Head headliners
I have a hitch
I still need the Door Sill

Check and Check :)
 
#34 ·
Thanks for the link drop.. We should have all orders from tonight shipped tomorrow morning. Let me know if anyone needs anything else. Thanks again, Christian #JJG
 
#36 ·
Got mine today. Installed - Today.

Glad I didn't wait, they came out but I can only imagine what a winter would have done.
New Delrins slip right in. Nice.

Like a sigh of relief. I remember what it was trying to get the doors off after this past winter.

Thanks for the quick shipment Christian.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top