Yes, I just put mine on 2 days ago. personally, I had trouble with the fit on a 2014 JKU Sport. Issues:
- the 4 big round holes at the top that go in b/t the frame and the grill were not lined up with the holes on my grill. Only 2 were aligned and the outside 2 I had to cut half of the metal off each one so it would lay flush on top and allow me to put the top clips back in. I cut them with an oscillating saw I got from harborfreight.
- the width of the grill was about 1/4 too wide on each side (the metal mesh netting). I took snips along both sides and cut off 1/4 inch of the mesh. You can't tell once everything goes back on.
- I got the one with the hood lock hole: the built-in hole on the grill was too high: just enough to force me to cut the bottom flap off the lock cover. the cover does not fit back on well b/c the grill insert is pushing up on the rubber, making the round rubber ring a bit oblong. (There was no way of mounting the insert lower in my Jeep's grill.)
- the raised part of the insert are not centered in my grill slots, I'm probably the only one that will notice.
So, having said that, I am happy with the appearance of them, and others have had no issues from what I have read.