Jeep Wrangler Forum banner

Flexing! How is my Jeep doing?

2K views 23 replies 8 participants last post by  Cajunhunter 
#1 ·
I am new to flexing. How are we doing ? It seems pretty good but don't really know how much articulation I should be getting.
 

Attachments

See less See more
1
#6 ·
Are you on the bump stops front and rear? It looks like you might have a little room for up travel. Less bump stop if your shocks will allow...
 
#9 ·
No bump stops added at all? Must be stock length shocks. If so, that's probably all you're going to get.

Need more shock length to get more flex.
 
#17 ·
You want to go until both compressed corners are on the bump stops.

This is a rear with 2" bump stops:



Here's a front that also looks like 2" bump stops:

 
#20 ·
oh I forgot you also need to measure your shocks to make sure they are not over extended and fully compressed as neither is healthy for them.
 
#22 ·
You're doing fine as long as you're not going to run into a whole bunch of varying off-camber whoop-dee-doos.
As long as you're not getting a wheel up too often (see photo), move on and spend your money on other toys.

 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top