Jeep Wrangler Forum banner

Gen I small block chevy

1K views 6 replies 7 participants last post by  i82much 
#1 ·
07 jk Sahara
Just wanting to find out the issues I will be running into on the computer side of things when I install my carbureted 383 sbc stroker with 500 hp. I already have the engine brand new so I don't want to buy a different one.
Will my lights all be lit upon the dash?
Will my trans overdrive work?
I will be running a Msd box for ignition.

Note I will be replacing a lot of the weak parts as I go along also.
We're I live we have no emission so that's not a factor. (Yet)
 
#3 ·
Your engine won't need the computer to run. The carb and distributor won't need it. But the Jeep will have some problems with the lack of info. I also don't know if your trying to run the stock trans. If so then I don't think there is an adaptor for that. But you could use a 700R trans and ditch the 42 trans. Check with Novak conversions for more info.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top