I did raptor liner that's a budget DIY bedliner option. It was $125 for the kit, and was $200 after i bought all the supplies sprayed. This is a thread on how i did it. http://www.jk-forum.com/jk-show-tell...hreads-238739/
. Monstaliner is another good DIY option. They are both LOTs of work, but less than half as expensive. They also need a day or two to harden where Line-x is as hard as it will get in 15 minutes.
It's the best mod you can do in my opinion. Especially if you like to go doorless, windowless, or topless. Light rains and sprinkles are not something you need to worry about. Is really nice to make a quick food run when it looks cloudy and a bit windy. I did get caught in a sudden downpour sideways rain once with my doors off. I also had to pull over to the side of the road for a fire truck that day. I got soaked, but I got a towel and dried off everything in less than 5 minutes. That probably wasn't needed. Clearly the drain plugs are easy to pull if need be, like they were that day. It's also nice for dust, pet hair, snow and sand. Raptor is super easy to clean with a swipe of a wet rag. I would assume Line-x would be the same. I would take a towel in and see how easy it is to clean on some of there demo stuff. For line-x to be UV color safe I think you need an option called xtra. You can save some money likely by doing some prep for them. The carpet is real easy to pull out in an hour or less. http://www.jk-forum.com/jk-write-ups...12-2dr-238728/